30µF · 450VACMotor Run Capacitor
Fits: Compressors & air tools, HVAC & heat pumps +2 more
from $29.95 In stock
Bianco PDG150M Capacitor
The Bianco PDG150M is a 1.1 kW single-phase submersible sewage/grinder pump commonly found in well & domestic pumps setups. Its motor runs on a 30µF 450V motor-run capacitor in a CBB60-style can — here's the exact replacement and how to confirm it.
- Pump type
- submersible sewage/grinder pump
- Motor
- 1.1 kW · single-phase
- Run capacitor
- 30µF · 450V · CBB60
- Start capacitor
- 300µF (separate)
- Application
- Well & domestic pumps
- Also sold as
- PDG150
- Fitment source
- Manufacturer-documented — our pump-spares records
Manufacturer-documented30µF · 450V
The Bianco PDG150M submersible sewage/grinder pump uses a 30µF 450V motor-run capacitor (CBB60-style) — it's the part that helps the single-phase motor start and keep running smoothly. We source this value from our pump-spares records. Match the replacement to 30µF (about 27–33µF) at 450V or higher; the checklist below covers how to confirm it against your own capacitor.
The capacitor that fits
One listing covers every terminal style — open it and choose your terminal (lug, flying lead, or stud) from the dropdown to match how your old capacitor's wires come out. Not sure? Any works electrically; the terminal is just the connection.
How to be sure you get the right one
- µF must match — the PDG150M needs 30µF (about 27–33µF), within roughly ±5–10%. Too low and the motor won't start; too high and it runs hot.
- Voltage can go up, never down — a 450V (or higher) cap is correct here; a 450V part safely replaces a 370V or 440V one. Don't fit below 450V.
- Check the terminal + size — make sure the new cap physically fits the housing and the connections match (or use a spade adapter).
- When in doubt, read your old cap — the printed µF and voltage on the part you're replacing is the final word.
Common questions — Bianco PDG150M capacitor
What capacitor does the Bianco PDG150M use?
A 30µF 450V motor-run capacitor (CBB60-style). Always confirm against the rating printed on your existing capacitor before ordering.
Can I fit a higher-voltage capacitor in the Bianco PDG150M?
Yes — voltage can be equal or higher, never lower. A capacitor rated 450V or above is fine (450V is the usual choice), as long as the µF still matches (30µF).
Does the PDG150M need a start capacitor as well?
Yes — alongside the 30µF run capacitor it uses a separate 300µF start capacitor. Replace whichever has failed (or both if you're unsure).
Other Bianco pump capacitors
Replacing the capacitor on a different Bianco? These models have a confirmed or documented fitment too:
- Bianco AHS10A — 25µF
- Bianco B120GS2 — 30µF
- Bianco B18VAS2 — 8µF
- Bianco B45VAS2 — 18µF
- Bianco B75VAS2 — 20µF
- Bianco BLC120-110S2 — 30µF
- Bianco BLC70-055S2 — 16µF
- Bianco FC150M — 40µF
- Bianco FC75 — 20µF
- Bianco FCT150M — 45µF
- Bianco INOX60S2 — 12µF
- Bianco INOX90S2 — 12µF
- Bianco MULTI34 — 16µF
- Bianco MULTI36 — 20µF
Spotted a mistake, or want to confirm this fits your exact unit? Tell us — we read every message and reply within a working day.