Pump capacitor fitment

DAB Aquajet 82 M Capacitor

The DAB Aquajet 82 M is a 0.6 kW single-phase jet pressure pump commonly found in well & domestic pumps setups. Its motor runs on a 12.5µF 450V motor-run capacitor in a CBB60-style can: here's the exact replacement and how to confirm it.

Pump type: jet pressure pump
Motor: 0.6 kW · single-phase
Run capacitor: 12.5µF · 450V · CBB60
Tolerance: ±5%
Application: Well & domestic pumps
Also sold as: Aquajet 82M, Aquajet 82, Aquajet Inox 82
Fitment source: Manufacturer-documented

Manufacturer-documented12.5µF · 450V

The DAB Aquajet 82 M jet pressure pump uses a 12.5µF 450V motor-run capacitor (CBB60-style): it's the part that helps the single-phase motor start and keep running smoothly. We source this value from manufacturer / supplier documentation. Match the replacement to 12.5µF (about 11.3-13.8µF) at 450V or higher; the checklist below covers how to confirm it against your own capacitor.

Matching capacitor

We don't currently stock this exact value (12.5µF 450V). Browse the closest matches or ask us. We can usually source it.

How to be sure you get the right one

µF must match: the Aquajet 82 M needs 12.5µF (about 11.3-13.8µF), within ±5% of the label. Too low and the motor won't start; too high and it runs hot.
Voltage can go up, never down: a 450V (or higher) cap is correct here; a 450V part safely replaces a 370V or 440V one. Don't fit below 450V.
Check the terminal + size: make sure the new cap physically fits the housing and the connections match (or use a spade adapter).
When in doubt, read your old cap: the printed µF and voltage on the part you're replacing is the final word.

Common questions - DAB Aquajet 82 M capacitor

What capacitor does the DAB Aquajet 82 M use?

A 12.5µF 450V motor-run capacitor (CBB60-style). Always confirm against the rating printed on your existing capacitor before ordering.

Can I fit a higher-voltage capacitor in the DAB Aquajet 82 M?

Yes, voltage can be equal or higher, never lower. A capacitor rated 450V or above is fine (450V is the usual choice), as long as the µF still matches (12.5µF).

Other DAB pump capacitors

Replacing the capacitor on a different DAB? These models have a confirmed or documented fitment too:

Browsing rather than replacing? All well & domestic pumps capacitors · Pump capacitor guide

Spotted a mistake, or want to confirm this fits your exact unit? Tell us. We read every message and reply within a working day.