DAB Aquajet Repair Kit - Seal & Capacitor (112M/132M)

A repair kit (also called a service kit) for the DAB Aquajet 112M/132M jet pressure pump: seal & capacitor in one order. It suits pumps using DAB 61M/16.

Fits

• DAB Aquajet 112M
• DAB Aquajet 132M

The repair kit to suit the DAB Aquajet 112M has two parts: a mechanical seal for a 13 mm shaft with carbon / ceramic faces that suits pumps using DAB 61M/16, and a 25 µF 450 VAC CBB60 run capacitor with flying leads. It covers the seal, the part that wears, and the motor’s run capacitor in one job, and costs less than buying the two separately. Check your old capacitor reads 25 µF before ordering.

What’s in the DAB Aquajet 112M repair kit

Both parts are CapacitorsNZ aftermarket replacements, and each is also sold on its own if you only need one of them.

• Mechanical seal to suit the Aquajet 112M: 13 mm shaft, carbon / ceramic faces, suits pumps using DAB 61M/16.
• 25 µF run capacitor to suit the Aquajet 112M: 450 VAC, CBB60 motor-run body, flying leads.
• No bearing set is listed for this model, so the kit is seal and capacitor only.

Why service the Aquajet 112M seal and capacitor together

On a jet pressure pump the shaft seal is the part that wears. Once it starts to weep, water can track along the shaft towards the motor, so it pays to change it at the first sign of a drip rather than waiting.

The run capacitor stays in circuit the whole time a single-phase motor is running, and it slowly loses capacity with heat and age. If you already have the pump off its base to do the seal, fitting a fresh capacitor at the same time is a quick extra step and rules out one common cause of a hard-starting or hot-running motor. Doing both in one visit means one shutdown of your water supply instead of two.

Checking your Aquajet 112M before you order

Check the old parts before fitting: match the µF printed on your old capacitor and the size of your old seal. The pump label may read Aquajet 112M or Aquajet 112. If your old capacitor shows a value other than 25 µF, buy that value instead and order the seal separately. Our DAB Aquajet 112M capacitor guide has more detail. Not sure? Send us a photo of the pump label and old parts. Kits for other DAB models are listed on our DAB repair kits page.

Before you order

Check the old parts before fitting: match the µF printed on your old capacitor and the size of your old seal.

What's in the DAB Aquajet 112M repair kit?

A 13 mm carbon / ceramic mechanical seal that suits pumps using DAB 61M/16, and a 25 µF 450 VAC run capacitor with flying leads. Both are aftermarket parts to suit the Aquajet 112M.

Is the Aquajet 112M kit cheaper than buying the seal and capacitor separately?

Yes. The kit costs less than the DAB Aquajet 112M seal and capacitor bought as two separate listings.

Does the DAB Aquajet 112M kit include bearings?

No. There is no bearing set listed for the Aquajet 112M, so this kit is the mechanical seal and run capacitor only.

My pump label says Aquajet 112, not 112M. Is this the right kit?

Aquajet 112 is listed as another name for the DAB Aquajet 112M. Before fitting, check that your old seal is for a 13 mm shaft and match the µF printed on your old capacitor; if it isn't 25 µF, order that value instead.

Do I have to change the capacitor when I replace the Aquajet 112M seal?

It isn't required, but the capacitor ages in service and is easy to swap while the DAB Aquajet 112M is already apart, which is why the kit pairs them.

What if it doesn't fit?

If it doesn't fit the model it's listed for, we refund or swap it and pay return postage. Not sure before ordering? Send us a photo of your old part and the pump label.