DAB K-Series K14/400 Repair Kit

A repair kit (also called a service kit) for the DAB K-Series K14/400 pump: seal, bearings & capacitor in one order. The same parts fit the K55/50. Where the K-Series models differ: the K20/41 uses a different seal (13 mm shaft); the K14/400 takes a 40 µF capacitor where the K20/41 takes 10 µF; the K12/200, K30/70 and K35/40 take 20 µF; the K30/100 and K45/50 take 30 µF; the K12/200, K20/41, K30/70, K35/40 and K36/100 use a different motor bearing set.

Fits

• DAB K-Series K14/400
• DAB K-Series K55/50

What’s in the DAB K14/400 repair kit

• Mechanical seal - 15 mm shaft
• Run capacitor - 40 µF 450 VAC, flying leads
• Motor bearing set

Why service the K14/400 in one go

• The seal is the part that wears out on a pump: once it weeps, water heads for the motor.
• The motor is already off the pump to change the seal, so it’s the easiest time to change the bearings.
• The capacitor is a quick swap while you’re working on the pump, and if it has been slow to start, the capacitor is the first thing to check.

Before you order

Check the old parts before fitting: match the µF printed on your old capacitor and the size of your old seal.

What size seal does the DAB K14/400 use?

The DAB K14/400 uses a mechanical seal for a 15 mm shaft. Check the size of your old seal before fitting.

What capacitor does the DAB K14/400 take?

A 40 µF run capacitor rated 450 VAC. Match the µF printed on your old capacitor; if it shows a different value, order that value instead.

Is the kit cheaper than buying the parts separately?

Yes, the parts total $134.85 separately and the kit is $120.95.

What if it doesn't fit?

If it doesn't fit the model it's listed for, we refund or swap it and pay return postage. Not sure before ordering? Send us a photo of your old part and the pump label.