Motor bearings for the Davey Silensor SLS200
A matched pair of sealed ball bearings (drive end and fan end) for the motor of the Davey Silensor SLS200 pool circulation pump (1.5 kW motor). Fitting both at once avoids pulling the motor apart twice.
Signs the Silensor SLS200 bearings are worn
- a grinding, rumbling or high-pitched whine from the motor
- the shaft feeling rough or gritty when turned by hand
- noise that started after a seal leak let water into the motor
The same bearing set is used in the Davey HS50, Davey HS60, Davey Silensor SLL150, Davey Silensor SLL200, Davey Silensor SLL300, Davey Silensor SLL400, Davey Silensor SLS75, Davey Silensor SLS100, Davey Silensor SLS150, Davey Silensor SLS300, Pedrollo PKM90.
Before you order
Check the old part before fitting: match the bearings in your old motor.
Compare the old bearings with these before pressing them on.
Capacitor details for this pump: Davey Silensor SLS200 capacitor guide.