Davey StarFlo SF DSF750 / DSF900 Capacitor
The Davey StarFlo SF DSF750 / DSF900 is a single-phase pool pump commonly found in pool & spa pumps setups. Its motor runs on a 15µF 450V motor-run capacitor in a CBB60-style can — here's the exact replacement and how to confirm it.
- Pump type
- pool pump
- Motor
- single-phase
- Run capacitor
- 15µF · 450V · CBB60
- Tolerance
- ±5%
- Terminal
- flying-lead
- Application
- Pool & spa pumps
- Also sold as
- DSF750, DSF900, StarFlo SF DSF750, StarFlo SF DSF900, DSF 750, DSF 900, Starflo SF DSF750, Starflo SF DSF900
- Fitment source
- Manufacturer-documented
The Davey StarFlo SF DSF750 / DSF900 pool pump uses a 15µF 450V motor-run capacitor (CBB60-style) — it's the part that helps the single-phase motor start and keep running smoothly. We source this value from manufacturer / supplier documentation. Match the replacement to 15µF (about 13.5–16.5µF) at 450V or higher; the checklist below covers how to confirm it against your own capacitor.
Matching capacitor
We don't currently stock this exact value (15µF 450V). Browse the closest matches or ask us — we can usually source it.
How to be sure you get the right one
- µF must match — the StarFlo SF DSF750 / DSF900 needs 15µF (about 13.5–16.5µF), within roughly ±5–10%. Too low and the motor won't start; too high and it runs hot.
- Voltage can go up, never down — a 450V (or higher) cap is correct here; a 450V part safely replaces a 370V or 440V one. Don't fit below 450V.
- Check the terminal + size — make sure the new cap physically fits the housing and the connections match (the StarFlo SF DSF750 / DSF900 typically uses a flying-lead terminal).
- When in doubt, read your old cap — the printed µF and voltage on the part you're replacing is the final word.
Common questions — Davey StarFlo SF DSF750 / DSF900 capacitor
What capacitor does the Davey StarFlo SF DSF750 / DSF900 use?
A 15µF 450V motor-run capacitor (CBB60-style). Always confirm against the rating printed on your existing capacitor before ordering.
Can I fit a higher-voltage capacitor in the Davey StarFlo SF DSF750 / DSF900?
Yes — voltage can be equal or higher, never lower. A capacitor rated 450V or above is fine (450V is the usual choice), as long as the µF still matches (15µF).
Other Davey pump capacitors
Replacing the capacitor on a different Davey? These models have a confirmed or documented fitment too:
- Davey Aqua-mate — 12µF
- Davey 125S/D & 165S/D — 30µF
- Davey 25301 (Mukmova) — 40µF
- Davey 71101 / 71201 Transfer — 12µF
- Davey 95S / 95D — 20µF
- Davey Celsior C200 — 8µF
- Davey Celsior C270 — 12µF
- Davey Celsior C400 — 25µF
- Davey CY70-110 — 30µF
- Davey CY70-75 / CY70-90 — 20µF
- Davey Dynaflo 62101 / 60061R — 30µF
- Davey Dynaflo 62201 — 40µF
- Davey Dynajet 90 — 20µF
- Davey HM270-25 — 40µF
Spotted a mistake, or want to confirm this fits your exact unit? Tell us — we read every message and reply within a working day.