Motor bearings for the Davey PCCR100
A matched pair of sealed ball bearings (drive end and fan end) for the motor of the Davey PCCR100 pool cleaner/booster pump. Fitting both at once avoids pulling the motor apart twice.
Signs the PCCR100 bearings are worn
- a grinding, rumbling or high-pitched whine from the motor
- the shaft feeling rough or gritty when turned by hand
- noise that started after a seal leak let water into the motor
The same bearing set is used in the Davey PACR100, Davey PCCR150.
Before you order
Check the old part before fitting: match the bearings in your old motor.
Compare the old bearings with these before pressing them on.
Capacitor details for this pump: Davey PCCR100 capacitor guide.