Davey Silensor SLL Repair Kit - Seal, Bearings & Capacitor (SLL200/300/400)

A repair kit (also called a service kit) for the Davey Silensor SLL200/300/400 pool pump: seal, bearings & capacitor in one order. It suits pumps using Davey 49771SP.

Fits

• Davey Silensor SLL200
• Davey Silensor SLL300
• Davey Silensor SLL400

What’s in the Davey Silensor SLL200 repair kit

• Mechanical seal - 5/8″ (15.88 mm) shaft
• Run capacitor - 25 µF 450 VAC, lug terminals
• Motor bearing set

Why service the Silensor SLL200 in one go

• The seal is the part that wears out on a pool pump: once it weeps, water heads for the motor.
• The motor is already off the pump to change the seal, so it’s the easiest time to change the bearings.
• The capacitor is a quick swap while you’re working on the pump, and if it has been slow to start, the capacitor is the first thing to check.

Before you order

Check the old parts before fitting: match the µF printed on your old capacitor and the size of your old seal.

Capacitor details for this pump: Davey Silensor SLL200 capacitor guide.

What size seal does the Davey Silensor SLL200 use?

The Davey Silensor SLL200 uses a mechanical seal for a 5/8" (15.88 mm) shaft. Check the size of your old seal before fitting.

What capacitor does the Davey Silensor SLL200 take?

A 25 µF run capacitor rated 450 VAC. Match the µF printed on your old capacitor; if it shows a different value, order that value instead.

Is the kit cheaper than buying the parts separately?

Yes, the parts total $127.85 separately and the kit is $114.95.

What if it doesn't fit?

If it doesn't fit the model it's listed for, we refund or swap it and pay return postage. Not sure before ordering? Send us a photo of your old part and the pump label.