Ships from NZ via NZ Post, tracked · 90-day DOA guarantee
Pump capacitor fitment

Onga Leisuretime LTP750 Capacitor

The Onga Leisuretime LTP750 is a 0.75 kW single-phase pool pump commonly found in pool & spa pumps setups. Its motor runs on a 20µF 450V motor-run capacitor in a CBB60-style can: here's the exact replacement and how to confirm it.

Pump type
pool pump
Motor
0.75 kW · single-phase
Run capacitor
20µF · 450V · CBB60
Tolerance
±5%
Application
Pool & spa pumps
Also sold as
LTP750, LTP 750, Leisuretime 750
Fitment source
Manufacturer-documented
Manufacturer-documented20µF · 450V

The Onga Leisuretime LTP750 pool pump uses a 20µF 450V motor-run capacitor (CBB60-style): it's the part that helps the single-phase motor start and keep running smoothly. We source this value from manufacturer / supplier documentation. Match the replacement to 20µF (about 18-22µF) at 450V or higher; the checklist below covers how to confirm it against your own capacitor.

How to be sure you get the right one

  • µF must match: the Leisuretime LTP750 needs 20µF (about 18-22µF), within ±5% of the label. Too low and the motor won't start; too high and it runs hot.
  • Voltage can go up, never down: a 450V (or higher) cap is correct here; a 450V part safely replaces a 370V or 440V one. Don't fit below 450V.
  • Check the terminal + size: make sure the new cap physically fits the housing and the connections match (or use a spade adapter).
  • When in doubt, read your old cap: the printed µF and voltage on the part you're replacing is the final word.

Service parts for the Onga Leisuretime LTP750

The seal, capacitor and bearings for this pump, on their own or as a kit. Check the old part before fitting.

Common questions - Onga Leisuretime LTP750 capacitor

What capacitor does the Onga Leisuretime LTP750 use?

A 20µF 450V motor-run capacitor (CBB60-style). Always confirm against the rating printed on your existing capacitor before ordering.

Can I fit a higher-voltage capacitor in the Onga Leisuretime LTP750?

Yes, voltage can be equal or higher, never lower. A capacitor rated 450V or above is fine (450V is the usual choice), as long as the µF still matches (20µF).

Other Onga pump capacitors

Replacing the capacitor on a different Onga? These models have a confirmed or documented fitment too:

Browsing rather than replacing? All pool & spa pumps capacitors · Pump capacitor guide

Spotted a mistake, or want to confirm this fits your exact unit? Tell us. We read every message and reply within a working day.