Onga Pantera PPP1100 Capacitor
The Onga Pantera PPP1100 is a 1.1 kW single-phase pool pump commonly found in pool & spa pumps setups. Its motor runs on a 25µF 450V motor-run capacitor in a CBB60-style can: here's the exact replacement and how to confirm it.
- Pump type
- pool pump
- Motor
- 1.1 kW · single-phase
- Run capacitor
- 25µF · 450V · CBB60
- Tolerance
- ±5%
- Application
- Pool & spa pumps
- Also sold as
- PPP1100, PPP 1100, Pantera 1100
- Fitment source
- Manufacturer-documented
The Onga Pantera PPP1100 pool pump uses a 25µF 450V motor-run capacitor (CBB60-style): it's the part that helps the single-phase motor start and keep running smoothly. We source this value from manufacturer / supplier documentation. Match the replacement to 25µF (about 22.5-27.5µF) at 450V or higher; the checklist below covers how to confirm it against your own capacitor.
How to be sure you get the right one
- µF must match: the Pantera PPP1100 needs 25µF (about 22.5-27.5µF), within ±5% of the label. Too low and the motor won't start; too high and it runs hot.
- Voltage can go up, never down: a 450V (or higher) cap is correct here; a 450V part safely replaces a 370V or 440V one. Don't fit below 450V.
- Check the terminal + size: make sure the new cap physically fits the housing and the connections match (or use a spade adapter).
- When in doubt, read your old cap: the printed µF and voltage on the part you're replacing is the final word.
Service parts for the Onga Pantera PPP1100
The seal, capacitor and bearings for this pump, on their own or as a kit. Check the old part before fitting.
- Onga Pantera PPP1100 Service Kit $97.95
- Onga Pantera PPP1100 Mechanical Seal $34.95
- Onga Pantera PPP1100 Capacitor $34.95
- Onga Pantera PPP1100 Bearing Set $39.95
Common questions - Onga Pantera PPP1100 capacitor
What capacitor does the Onga Pantera PPP1100 use?
A 25µF 450V motor-run capacitor (CBB60-style). Always confirm against the rating printed on your existing capacitor before ordering.
Can I fit a higher-voltage capacitor in the Onga Pantera PPP1100?
Yes, voltage can be equal or higher, never lower. A capacitor rated 450V or above is fine (450V is the usual choice), as long as the µF still matches (25µF).
Other Onga pump capacitors
Replacing the capacitor on a different Onga? These models have a confirmed or documented fitment too:
- Onga Leisuretime LTP550: 20µF
- Onga Leisuretime LTP750: 20µF
- Onga Pantera PPP1500: 25µF
- Onga Pantera PPP550: 20µF
- Onga Pantera PPP750: 20µF
Browsing rather than replacing? All pool & spa pumps capacitors · Pump capacitor guide
Spotted a mistake, or want to confirm this fits your exact unit? Tell us. We read every message and reply within a working day.