CBB60Motor Run

20µF · 450VAC · CBB60 Motor Run Capacitor

SKU CBB60-L-20-450V

$29.95NZD

Terminal style

20µF
450V
CBB60
Lug Terminal

In NZ stockIn NZ stock, dispatched in 1-3 working days.

NZ$10.00 flat shipping, free over NZ$100. Ships from New Zealand via NZ Post, tracked. NZ addresses only.

Quantity

90-day DOA guarantee: arrives faulty or fails within 90 days, we replace it or refund in full, your choice. Returns & guarantees

Not sure? Send us a photo

20µF · 450V · Lug Terminal$29.95

Specifications

Capacitance	20µF (also written 20uF, 20 microfarad or 20 MFD)
Voltage	450V
Type	Motor Run
Body	CBB60
Terminal	Lug Terminal · Core Lead
Tolerance	±5%
Frequency	50/60 Hz

Old part rated 370V or 440V? A 450V cap is the correct replacement for any motor-run capacitor rated 450V or below: the voltage is a ceiling, not a target; never fit a lower one. Match the µF on your old capacitor's label, within ±5%.

What you're buying

A 20µF 450VAC motor run capacitor in the CBB60 body, designed to run continuously while the motor is operating. This listing covers every terminal style (Lug Terminal or Core Lead): choose yours from the Terminal dropdown above to match how your old capacitor's wires come out. The µF and voltage are identical across all of them: only the connection differs.

µF (capacitance) and voltage are the two specs that matter for fitment. Match the µF on the old capacitor's label, within ±5%: too low and the motor won't start, too high and it will run hot. Voltage must be equal or higher than the original; you can safely substitute a 450VAC unit for any motor specced at 450V or below, but never the other way around.

Commonly used for

HVAC & heat pumps: typical range 5-80µF · 370/440V
Pool & spa pumps: typical range 15-60µF · 370/450V
Well & domestic pumps: typical range 8-70µF · 450V

Which terminal do I need?

This 20µF cap is sold as one listing with 2 terminal styles (Lug Terminal or Core Lead), selectable from the dropdown above: the µF and voltage are identical across all of them, only the connection differs. Lug Terminal: 6.3mm quick-connect male tabs that take push-on female spade receptacles. No soldering, just push on. Core Lead: a central threaded stud for bracket mounting plus lead-out wires. Pick the style that matches how your old capacitor connected, or fit a spade adapter to convert between them.

Construction

metallised polypropylene film, oval/rectangular plastic case with wire leads or spade terminals: the most common motor-run body in NZ.
Polypropylene film, self-healing: small punctures clear without short-circuit.
±5% capacitance tolerance · 50/60 Hz · 70°C max ambient operating temperature.
Mounting: Wire leads or spade terminals.
Terminal options: Lug Terminal or Core Lead. Select on the page.

What not to buy this for

Don't buy this for a motor-start application (compressor relay, pump priming). Motor-start caps usually have a much higher µF for short bursts and a CD60 body. This unit is rated for continuous duty, not the high inrush of a start cap.
Don't buy by µF alone: physical size needs to fit the housing, and the terminal style (pick Lug Terminal or Core Lead to match your wiring) needs to match your existing wiring or you'll need an adapter.

Need a start capacitor? CD60 start capacitors, 50-500µF · how to size a CD60 start capacitor.

New to capacitors? Our pump capacitor guide covers run vs start caps, how they fail, and how to read the µF and voltage off your old part. If you know your pump's brand and model, the pump capacitor finder maps it straight to the right replacement. Before you order: how to test the old capacitor with a multimeter.

Common questions

My old capacitor is rated 370V or 440V. Can I fit this 450V one?

How closely does the 20µF capacitance need to match my old capacitor?

Match the µF on your old capacitor's label, within ±5%. Too low and the motor may not start; too high and it can run hot. Read the µF (and the voltage) printed on the side of your existing capacitor before ordering.

Which terminal option should I choose?

This listing covers 2 terminal styles (Lug Terminal, Core Lead): the µF and voltage are identical across all of them, only the connection differs. Pick the style from the Terminal dropdown that matches how your old capacitor's wires came out, or fit a spade adapter to convert between them.

What does shipping cost, and is anything added at checkout?

Ships from New Zealand via NZ Post, tracked. Flat NZ$10 shipping nationwide, free over NZ$100. CapacitorsNZ is not GST registered, so no GST is charged or added at checkout. In NZ stock, dispatched in 1-3 working days.

Buying for a specific pump?

This 20µF capacitor is also listed under each pump model it is packed for, with that model's own fitting notes.

Pump capacitor finder pages that confirm a 20µF capacitor:

Also packed in these pump service kits: AstralPool CX180 service kit · AstralPool CX240 service kit · AstralPool CX280 service kit · DAB Jetinox 90M service kit · DAB K12/200 service kit · DAB K30/70 service kit · DAB K35/40 service kit · Davey PowerMaster service kit · Onga Leisuretime LTP550 service kit · Onga Leisuretime LTP750 service kit · Onga Pantera PPP550 service kit · Onga Pantera PPP750 service kit · Pedrollo PKM90 service kit

While the pump is open

Seals and bearings listed for the same pump models as this capacitor, the parts worth doing in the same teardown. Check the fit against your own model before ordering.