Davey Silensor SLS300 Capacitor
The Davey Silensor SLS300 is a single-phase pool pump commonly found in pool & spa pumps setups. Its motor runs on a 25µF 450V motor-run capacitor in a CBB60-style can: here's the exact replacement and how to confirm it.
- Pump type
- pool pump
- Motor
- single-phase
- Run capacitor
- 25µF · 450V · CBB60
- Tolerance
- ±5%
- Application
- Pool & spa pumps
- Also sold as
- SLS300, Silensor SLS300, SLS 300
- Fitment source
- Manufacturer-documented
The Davey Silensor SLS300 pool pump uses a 25µF 450V motor-run capacitor (CBB60-style): it's the part that helps the single-phase motor start and keep running smoothly. We source this value from manufacturer / supplier documentation. Match the replacement to 25µF (about 22.5-27.5µF) at 450V or higher; the checklist below covers how to confirm it against your own capacitor.
How to be sure you get the right one
- µF must match: the Silensor SLS300 needs 25µF (about 22.5-27.5µF), within ±5% of the label. Too low and the motor won't start; too high and it runs hot.
- Voltage can go up, never down: a 450V (or higher) cap is correct here; a 450V part safely replaces a 370V or 440V one. Don't fit below 450V.
- Check the terminal + size: make sure the new cap physically fits the housing and the connections match (or use a spade adapter).
- When in doubt, read your old cap: the printed µF and voltage on the part you're replacing is the final word.
Service parts for the Davey Silensor SLS300
The seal, capacitor and bearings for this pump, on their own or as a kit. Check the old part before fitting.
- Davey Silensor SLS300 Service Kit $114.95
- Davey Silensor SLS300 Mechanical Seal $57.95
- Davey Silensor SLS300 Capacitor $29.95
- Davey Silensor SLS300 Bearing Set $39.95
Common questions - Davey Silensor SLS300 capacitor
What capacitor does the Davey Silensor SLS300 use?
A 25µF 450V motor-run capacitor (CBB60-style). Always confirm against the rating printed on your existing capacitor before ordering.
Can I fit a higher-voltage capacitor in the Davey Silensor SLS300?
Yes, voltage can be equal or higher, never lower. A capacitor rated 450V or above is fine (450V is the usual choice), as long as the µF still matches (25µF).
Other Davey pump capacitors
Replacing the capacitor on a different Davey? These models have a confirmed or documented fitment too:
- Davey Aqua-mate: 12µF
- Davey 125S/D & 165S/D: 30µF
- Davey 25301 (Mukmova): 40µF
- Davey 71101 / 71201 Transfer: 12µF
- Davey 95S / 95D: 20µF
- Davey Celsior C200: 8µF
- Davey Celsior C270: 12µF
- Davey Celsior C400: 25µF
- Davey CY70-110: 30µF
- Davey CY70-75 / CY70-90: 20µF
- Davey Dynaflo 62101 / 60061R: 30µF
- Davey Dynaflo 62201: 40µF
- Davey Dynajet 90: 20µF
- Davey HM270-25: 40µF
Browsing rather than replacing? All pool & spa pumps capacitors · Pump capacitor guide
Spotted a mistake, or want to confirm this fits your exact unit? Tell us. We read every message and reply within a working day.