Ships from NZ via NZ Post, tracked · 90-day DOA guarantee
Run CapacitorPool pump

Davey Silensor SLS300 Capacitor

25 µF 450 VAC run capacitor to suit the Davey Silensor SLS300 pool pump. Match the µF on your old capacitor. Not made by Davey.

SKU DAV-SILENSORSLS300-CAP
$29.95NZD
  • 25µF
  • 450V
  • Lug terminals
  • Davey Silensor SLS300
Ordered inOrdered in for you, dispatched from NZ in about 2 weeks.

NZ$10.00 flat shipping, free over NZ$100. Ships from New Zealand via NZ Post, tracked. NZ addresses only.

90-day DOA guarantee: arrives faulty or fails within 90 days, we replace it or refund in full, your choice. Returns & guarantees

Not sure? Send us a photo
Run Capacitor$29.95

Specifications

Capacitance25µF (also written 25uF, 25 microfarad or 25 MFD)
Voltage450V
TerminalLug terminals
SuitsDavey Silensor SLS300
Applicationpool pump

About this part

The capacitor listed to suit the Davey Silensor SLS300 pool pump is a 25 µF (25 uF / 25 MFD), 450 VAC CBB60 motor-run capacitor with lug (spade) terminals. Match it to the µF value printed on your old capacitor: if it reads 25 µF, this is the right part; if it shows a different number, order that value instead.

Choosing the right capacitor for the Davey Silensor SLS300

A single-phase pump motor like the SLS300 keeps its run capacitor in circuit the whole time it is running. The replacement needs the same microfarad value, usually within plus or minus 5 percent, and a voltage rating equal to or higher than the old one. The value is printed on the capacitor body as µF, uF or MFD.

Our Silensor SLS300 capacitor guide walks through finding and reading the old capacitor. The same 25 µF part is also sold as a stand-alone 25 µF 450 V CBB60 capacitor.

Symptoms of a failing run capacitor

Run capacitors lose capacitance with age and heat. Common signs on a pool pump:

  • a hum at switch-on with no spin, or the shaft only turning after a nudge
  • the breaker or motor overload tripping soon after start-up
  • a motor that runs hot or sluggish
  • a swollen, split or leaking capacitor case

Other Davey pumps listed at 25 µF

Our listings for the Silensor SLL150, Silensor SLL200, Silensor SLL300 and Silensor SLL400 use the same 25 µF 450 VAC rating. Pumps can be rewound or fitted with a different motor over their life, so the old capacitor in your hand is the final word, not the model name.

Swapping the SLS300 capacitor safely

Switch off and isolate the pump before opening the motor cover. A capacitor can hold a charge after the power is removed, so discharge it safely before touching the terminals, or have an electrician do the swap if you are unsure. Note which wire goes to which lug before removing the old one. If the seal is also due, the Silensor SLS300 service kit pairs this capacitor with the seal, and other models are on our Davey service kits page.

Before you order

Check the old part before fitting: match the µF printed on your old capacitor.

Questions

What size capacitor does a Davey Silensor SLS300 take?

Our listing for the Davey Silensor SLS300 is a 25 µF 450 VAC run capacitor. Match the µF printed on your old capacitor; if it shows a different value, order that value.

What terminals does the Silensor SLS300 capacitor have?

The Davey Silensor SLS300 capacitor listed here has lug (spade) terminals on a CBB60 motor-run body.

Can I use a higher voltage capacitor on the Silensor SLS300?

Yes, a higher voltage rating is fine on the Davey Silensor SLS300 as long as the µF value matches your old capacitor. Never fit one rated at a lower voltage than the old one.

How do I know if my Silensor SLS300 capacitor has failed?

A Davey Silensor SLS300 that hums without starting, trips the breaker or runs hot often has a weak run capacitor. A bulging or leaking case is a clear sign it needs replacing.

Is there a kit with the capacitor and seal for the Silensor SLS300?

Yes, the Davey Silensor SLS300 service kit includes this 25 µF capacitor plus a mechanical seal for the 5/8″ shaft.

What if it doesn't fit?

If you're unsure, send us a photo of your old part and the pump's label before ordering.

Other parts for the Davey Silensor SLS300

Other pumps that use this part