DAB Jet 102M Bearing Set

Motor bearings for the DAB Jet 102M

A matched pair of sealed ball bearings (drive end and fan end) for the motor of the DAB Jet 102M jet pressure pump (0.75 kW motor). Fitting both at once avoids pulling the motor apart twice.

Signs the Jet 102M bearings are worn

• a grinding, rumbling or high-pitched whine from the motor
• the shaft feeling rough or gritty when turned by hand
• noise that started after a seal leak let water into the motor

The same bearing set is used in the DAB Aquajet 102M, DAB K12/200.

Before you order

Check the old part before fitting: match the bearings in your old motor.
Compare the old bearings with these before pressing them on.

Capacitor details for this pump: DAB Jet 102M capacitor guide.

Do I need to replace both bearings in the DAB Jet 102M motor?

Yes, replace both together. The set includes the drive-end and fan-end bearings.

What if it doesn't fit?

If you're unsure, send us a photo of your old part and the pump's label before ordering.