Motor bearings for the DAB Aquajet 102M
A matched pair of sealed ball bearings (drive end and fan end) for the motor of the DAB Aquajet 102M jet pressure pump (0.75 kW motor). Fitting both at once avoids pulling the motor apart twice.
Signs the Aquajet 102M bearings are worn
- a grinding, rumbling or high-pitched whine from the motor
- the shaft feeling rough or gritty when turned by hand
- noise that started after a seal leak let water into the motor
The same bearing set is used in the DAB Jet 102M, DAB K12/200.
Before you order
Check the old part before fitting: match the bearings in your old motor.
Compare the old bearings with these before pressing them on.
Capacitor details for this pump: DAB Aquajet 102M capacitor guide.