Motor bearings for the DAB K12/200
A matched pair of sealed ball bearings (drive end and fan end) for the motor of the DAB K12/200 centrifugal pump. Fitting both at once avoids pulling the motor apart twice.
Signs the K12/200 bearings are worn
- a grinding, rumbling or high-pitched whine from the motor
- the shaft feeling rough or gritty when turned by hand
- noise that started after a seal leak let water into the motor
The same bearing set is used in the DAB Aquajet 102M, DAB Jet 102M.
Before you order
Check the old part before fitting: match the bearings in your old motor.
Compare the old bearings with these before pressing them on.
Capacitor details for this pump: DAB K12/200 capacitor guide.