DAB Jet 102M Service Kit

What’s in the DAB Jet 102M service kit

• Mechanical seal - 13 mm shaft
• Run capacitor - 16 µF (16 uF / 16 MFD) 450 VAC, core leads
• Motor bearing set

Why service the Jet 102M in one go

• The seal is the part that wears out on a jet pressure pump: once it weeps, water heads for the motor.
• The motor is already off the pump to change the seal, so it’s the easiest time to change the bearings.
• The capacitor is a quick swap while you’re working on the pump, and if it has been slow to start, the capacitor is the first thing to check.

Before you order

Check the old parts before fitting: match the µF printed on your old capacitor and the size of your old seal.

Capacitor details for this pump: DAB Jet 102M capacitor guide.

What size seal does the DAB Jet 102M use?

The DAB Jet 102M uses a mechanical seal for a 13 mm shaft. Check the size of your old seal before fitting.

What capacitor does the DAB Jet 102M take?

A 16 µF run capacitor rated 450 VAC. Match the µF printed on your old capacitor. If it shows a different value, order that value instead.

Is the kit cheaper than buying the parts separately?

Yes, the parts total $124.85 separately and the kit is $111.95.

What if it doesn't fit?

If you're unsure, send us a photo of your old part and the pump's label before ordering.